Skip to main content

SOL Settings

This page allows you to configure which event on the page will trigger the SOL log.

SOL Configuration​

This page allows you to configure the Baud rate between the BMC card and the host.

  • Volatile Bit Rate: Select the baud rate from the drop-down list that will be used for both the IPMI and HTML based SOL. This field will be overwritten as the same value as Non-Volatile Bit Rate after system reboot.

  • Non-Volatile Bit Rate: Select the baud rate from the drop-down list that will be saved. This value will be set to the Volatile Bit Rate after system reboot.