Skip to main content

Auto Video Trigger Settings

This page is used to configure the events that will trigger auto video recording function of the KVM server.

Auto Video Trigger Settings​

  • Critical Events (Temperature/Voltage): Trigger the recording by the critical events for Temperature/Voltage sensor.

  • Non Critical Events (Temperature/Voltage): Trigger the recording by the non-critical events for Temperature/Voltage sensor.

  • Non Recoverable Events (Temperature/Voltage): Trigger the recording by the non-recoverable events for Temperature/Voltage sensor.

  • Fan state changed Events: Trigger the recording by all fan sensor events.

  • Watchdog Timer Events: Trigger the recording when watchdog timer be triggered.

  • Chassis Power On Events: Trigger the recording by system power on events (DC on).

  • Chassis Power Off Events: Trigger the recording by system power off events (DC off).

  • Chassis Reset Events: Trigger the recording by system reset events.

  • LPC Reset Events: Trigger the recording by Host LPCRESET event.

  • Date and Time Event: Trigger the recording by specific date and time.

  • Pre-Event Video Recording: Disable or enable pre-event recording selection for newly modified configuration.

    Note
    Pre-Event video recording will not occur when active KVM session or Post-Event video recording is in progress.

Auto Video Remote Storage​

This page is used to configure the remote storage path.

  • Record Video to Remote Server: Check the box to enable remote video support. If remote video support is enabled, then the video files will be stored in remote path.

  • Maximum Dumps: Enter maximum dumps of the video.

  • Maximum Duration (Sec): Enter maximum duration of the video.

  • Maximum Size (MB): Enter maximum size of the video.

  • Server Address: Specify server address of the server.

  • Path in Server: Enter the source path.

  • Share Type: Select the Share Type (NFS/CIFS). If the selected share type is (CIFS), enter the User Name, Password and Domain Name in the respective fields.

Pre-Event Video Recordings​

This page used to configure the Pre-Event video recording configurations.

  • Video Quality: To set video quality, select ranges from the drop-down list.

  • Compression Mode: To set compression mode, select modes from the drop-down list.

  • Frames Per Second: To set number of frames per second, select frames/sec (1-4) from the drop-down list.

  • Video Duration: To set duration of video, select second (10-60) from the drop-down list.