Skip to main content

SMM3 firmware update commands

Use this information to update SMM3 firmware.

1. SMM3 firmware update OneCli commands
Use the following OneCli command to update SMM3 firmware
OneCli.exe update flash --dir <folder path> --smm [USERNAME]:[PASSWORD]@[SMM3_IP][:port] --log 5
2. SMM3 firmware update Redfish commands
  1. Upload SMM3 Image File (.uxz)

    curl -k -H "Content-Type: application/octet-stream" -X POST -T [SMM3_UXZ_IMAGE] https://[USERNAME]:[PASSWORD]@[SMM3_IP]/redfish/v1/UpdateService/update
  2. Start updating firmware.

    curl -k -H "Content-Type: application/json" -X POST -d '{"target": "/redfish/v1/Managers/bmc"}' https://[USERNAME]:[PASSWORD]@[SMM3_IP]/redfish/v1/UpdateService/Actions/UpdateService.StartUpdate
  3. Query update progress.

    curl -k -H "Content-Type: application/json" https://[USERNAME]:[PASSWORD]@[SMM3_IP]/redfish/v1/TaskService/Tasks/0
  4. After the Task State shows “Completed” in Step 3, restart SMM3.

    curl -k -H "Content-Type: application/json" -X POST https://[USERNAME]:[PASSWORD]@[SMM3_IP]/redfish/v1/Managers/bmc/Actions/Manager.Reset -d '{"ResetType": "GracefulRestart"}'