Skip to main content

Flex System x220 Compute Node Types 2585 and 7906

The Lenovo Flex System x220 Compute Node Types 2585 and 7906 is a high-density, scalable compute node that is ideally suited for high performance and virtualized environments.


Graphic of Flex System x220 Compute Node
  • PDF files
    Information about the Flex System x220 Compute Node is available in Portable Document Format (PDF) files.
  • Introduction
    The Lenovo Flex System x220 Compute Node Types 2585 and 7906 is a high-availability, scalable compute node that is optimized to support the next-generation microprocessor technology and is ideally suited for medium and large businesses.
  • Configuring
    Use this information to update the firmware and use the configuration utilities.
  • Installing the operating system
    Use these instructions to install the operating system on the compute node.
  • Accessing the IMM2
    Use this information to access the IMM2 remotely by using the command-line interface, Serial over LAN, or web interface; or locally through the LAN over USB interface.
  • Installing, removing, and replacing compute node components
    Use this information to install, remove, and replace customer replaceable units (CRUs) and optional devices in the compute node.
  • Parts listing, Types 2585 and 7906
    The following replaceable components are available for the Flex System x220 Compute Node Types 2585 and 7906.
  • Troubleshooting
    Use this information to diagnose and correct problems that might occur in your Flex System x220 Compute Node.
  • Notices
    Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area.