Skip to main content

Flex System x440 Compute Node Types 7167 and 2590

The Lenovo Flex System x440 Compute Node Types 7167 and 2590 is a high-density, scalable compute node that is ideally suited for high performance and virtualized environments.


Graphic of Lenovo Flex System x440 Compute Node Types 7167 and 2590
  • PDF files
    Information about the x440 Compute Node Types 7167 and 2590 is available in Portable Document Format (PDF) files.
  • Introduction
    The Lenovo Flex System x440 Compute Node Types 7167 and 2590 is a high-availability, scalable compute node that is optimized to support the next-generation microprocessor technology and is ideally suited for medium and large businesses.
  • Configuring
    Use this information to update the firmware and use the configuration utilities.
  • Installing the operating system
    Use these instructions to install the operating system on the compute node.
  • Accessing the IMM2
    Use this information to access the integrated management module II (IMM2) remotely by using the command-line interface (IPMI shell) or serial over LAN, or locally through the LAN over USB interface.
  • Installing, removing, and replacing compute node components
    Use this information to install, remove, and replace FRUs and optional devices in the compute node.
  • Parts listing, Types 7167 and 2590
    The following replaceable components are available for the Lenovo Flex System x440 Compute Node Types 7167 and 2590.
  • Troubleshooting
    Use this information to diagnose and correct problems that might occur in your x440 Compute Node Types 7167 and 2590.
  • Notices
    Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area.