Install the top cover

Follow instructions in this section to install the top cover.

S014

CAUTION

Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached.

S033

CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

About this task

Attention

• Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

• Make sure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.

• Make sure that all internal cables are correctly routed. See Internal cable routing.

Procedure

1. Turn the keylock to the unlock position with the key; then, take the key out of the keylock, and reverse the node to let the top side facing up.
   Figure 1. Unlocking the keylock
   
   
2. Align the top cover with the guiding slots on both sides of the chassis; then, slide it forward until it is firmly seated.
   Figure 2. Installing the top cover
   
   
3. Let the bottom side of the node facing up. Turn the keylock to the lock position with the key, and store the key for future use.
   Figure 3. Locking the keylock