Use this table to view specific information about the blade appliance, such as blade appliance hardware features and the dimensions of the blade appliance.
Power, cooling, removable-media drives, external ports, and advanced system management are provided by the BladeCenter® unit.
The following table is a summary of the features and specifications of the blade appliance.
Table 1. Features and specificationsMicroprocessor: Supports two multi-core Intel Xeon microprocessors Memory:- 12 dual inline memory module (DIMM) connectors
- Type: Very Low Profile (VLP) double-data rate (DDR3) DRAM. Supports six 2 GB DIMMs on the system board
Drives: Two hot-swap, small form factor (SFF) Serial Attached SCSI (SAS) storage drives Integrated functions:- Local service processor: Integrated Management Module (IMM) with Intelligent Platform Management Interface (IPMI) firmware
- Integrated Matrox G200eV video controller
- LSI 1064E SAS controller
- Broadcom BCM5709S dual-port Gigabit Ethernet controller
- Broadcom BCM57711 dual-port 10 Gigabit Ethernet controller
The blade appliance high-speed Ethernet interfaces are available only when the blade appliance is installed in BladeCenter unit that is high-speed-switch capable. A high-speed 10GbE I/O module must also be installed in the BladeCenter unit that is set up for operation with the blade appliance. (continued) | Integrated functions: (continued) - Integrated keyboard/video/mouse (cKVM) controller through IMM
- Light path diagnostics
- RS-485 interface for communication with the management module
- Automatic server restart (ASR)
- USB 2.0 for communication with cKVM and removable media drives
- Serial over LAN (SOL)
- Redundant buses for communication with keyboard, mouse, and removable media drives
Predictive Failure Analysis (PFA) alerts:- Microprocessors
- Memory
- Storage drives
Electrical input: 12 V dc Size:- Height: 24.5 cm (9.7 inches) (6U)
- Depth: 44.6 cm (17.6 inches)
- Width: 5.9 cm (2.32 inches)
- Maximum weight: 7.4 kg (16.3 lb)
| Environment:- Air temperature:
- Blade server on: 10°C to 35°C (50°F to 95°F). Altitude: 0 m to 914.4 m (0 ft to 3000 ft)
- Blade server on: 10°C to 32°C (50°F to 89.6°F). Altitude: 914.4 m to 2133.6 m (3000 ft to 7000 ft)
- Blade server off: 10°C to 43°C (50°F to 109.4°F). Altitude: 914.4 m to 2133.6 m (3000 ft to 7000 ft)
- Blade server shipping: -40°C to 60°C (-40°F to 140°F)
- Humidity:
- Blade server on: 8% to 80%
- Blade server off: 8% to 80%
- Blade server storage: 5% to 80%
- Blade server shipment: 5% to 100%
- Particulate contamination:
Airborne particulates and reactive gases acting alone or in combination with other environmental factors such as humidity or temperature might pose a risk to the server. For information about the limits for particulates and gases, see Particulate contamination.
|