Skip to main content

Introduction

The IBMBladeCenter HS22 Type 7870, 1936, and 1911 blade server is compatible with IBMBladeCenter units. This high density, high performance, single-wide blade server is ideally suited for medium and large businesses. The IBMBladeCenter HS22 blade server supports up to two multi-core IntelXeon microprocessors and has twelve memory-module slots, two hot-swappable storage-device bays, one Horizontal-compact-form-factor (CFFh) expansion card connector, one Vertical-combination-I/O (CIOv) connector, and one internal USB connector.

Note
Unless otherwise stated, references to the BladeCenter unit apply to all BladeCenter unit types.
This Installation and User's Guide provides information about:
  • Setting up the blade server
  • Starting and configuring the blade server
  • Installing hardware options
  • Installing the operating system
  • Performing basic troubleshooting of the blade server

Packaged with this document are software CDs that help you to configure hardware, install device drivers, and install the operating system.

To download the latest device drivers, complete the following steps.
Note
Changes are made periodically to the IBM Web site. The actual procedure might vary slightly from what is described in this document.
  1. Go to http://www.ibm.com/systems/support/.
  2. Under Product support, click BladeCenter.
  3. Under Popular links, click Software and device drivers.
  4. Click BladeCenter HS22 to display the matrix of downloadable files for the blade server.

The blade server comes with a limited warranty. For information about the terms of the warranty and getting service and assistance, see the Warranty and Support Information document for your blade server on the IBMDocumentation CD. You can obtain up-to-date information about the blade server at http://www.ibm.com/systems/bladecenter/.

If firmware and documentation updates are available, you can download them from the IBM Web site. The blade server might have features that are not described in the documentation that comes with the blade server, and the documentation might be updated occasionally to include information about those features, or technical updates might be available to provide additional information that is not included in the blade server documentation.

To check for updates, complete the following steps.

Note
Changes are made periodically to the IBM Web site. Procedures for locating firmware and documentation might change from what is described in this document.
  1. Go to http://www.ibm.com/systems/support/.
  2. Under Product support, click BladeCenter.
  3. Under Popular links, click Software and device drivers for firmware updates, or click Publications lookup for documentation updates.

You can subscribe to information updates specific to your blade server at http://www.ibm.com/support/mynotifications.

Note
The illustrations in this document might differ slightly from the hardware.

Graphic illustrating the BladeCenter HS22
The model number and serial number are on the ID label on the side of the control panel on the front of the blade server, and on a label on the side of the blade server that is visible when the blade server is not in the BladeCenter unit.
Note
The illustrations in this document might differ slightly from the hardware.
Important
Do not place the label on the blade server itself or in any way block the ventilation holes on the blade server.

Graphic illustrating the location of the machine type and serial number.

A set of blank labels for your blade server comes with the BladeCenter unit. When you install the blade server in the BladeCenter unit, write identifying information on a label and place the label on the BladeCenter unit bezel. See the documentation for your BladeCenter unit for recommended label placement.

  • Features and specifications
    Use this table to view specific information about the blade server, such as blade server hardware features and the dimensions of the blade server.
  • What your blade server offers
    Your blade server offers features, such as, the Integrated Management Module, storage disk drive support, IBM® Director, IBM Enterprise X-Architecture, microprocessor technology, integrated network support, I/O expansion, large system-memory capacity, light path diagnostics, PCI Express, and power throttling.
  • Reliability, availability, and serviceability features
    Reliability, availability, and serviceability features help to ensure the integrity of the data that is stored in the blade server, the availability of the blade server when you need it, and the ease with which you can diagnose and correct problems.
  • Major components of the blade server
    Use this information to locate the major components on the blade server. The major components of the blade server include Field Replaceable Units (FRUs), Customer Replaceable Units (CRUs), and optional devices.
  • Related documentation
    Use this information to identify and locate related blade server documentation.
  • Safety and environmental notices
    Safety notices might occur anywhere in this documentation.
  • Notices
    This information was developed for products and services offered in the U.S.A.
  • Power, controls, and indicators
    Use this information to view power features, turn on and turn off the blade server, and view the functions of the controls and indicators.
  • Blade server system-board layouts
    Use this layout to locate connectors, LEDs and switches on the system board of the blade server.