Skip to main content

security ipsec policy show

Display IPsec policies

Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

Description​

The security ipsec policy show command displays information about configured IPsec policies. All parameters are optional. This command is supported only when IPsec is enabled.

Running the command with the -vserver parameter displays all policies associated with the specified vserver.

You can specify additional parameters to display only information that matches those parameters. For example, to display policies associated with a certain local ip subnet, run the command with the -local-ip-subnets parameter.

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>,... parameter, the command displays only the specified fields. Notice that key fields are always displayed.
| [-instance ]}
If you specify the -instance parameter, the command displays all fields of the policies.
[-vserver <vserver name>] - Vserver
If you specify this parameter, only policies associated with this Vserver will be displayed.
[-name <text>] - Policy Name
This parameter specifies the policy to be displayed.
[-local-ip-subnets <IP Address/Mask>, ...] - Local IP Subnets
If you specify this parameter, information about local-ip-subnets will be displayed.
[-remote-ip-subnets <IP Address/Mask>, ...] - Remote IP Subnets
If you specify this parameter, information about remote-ip-subnets will be displayed.
[-local-ports {<Number>|<StartingNumber>-<EndingNumber>}, ...] - Local Ports
If you specify this parameter, information about local-ports will be displayed.
[-remote-ports {<Number>|<StartingNumber>-<EndingNumber>}, ...] - Remote Ports
If you specify this parameter, information about remote-ports will be displayed.
[-protocols {<Protocol Number>|<Protocol Name>}, ...] - Protocols
If you specify this parameter, information about protocols will be displayed.
[-action <IPsec Action Type>] - Action
If you specify this parameter, information about action will be displayed.
[-cipher-suite <Cipher Suite Type>] - Cipher Suite
If you specify this parameter, information about cipher-suite will be displayed.
[-ike-lifetime <integer>] - IKE Security Association Lifetime
If you specify this parameter, information about ike-lifetime will be displayed.
[-ipsec-lifetime <integer>] - IPsec Security Association Lifetime
If you specify this parameter, information about ipsec-lifetime will be displayed.
[-ipsec-lifetime-bytes <integer>] - IPsec Security Association Lifetime (bytes)
If you specify this parameter, information about ipsec-lifetime-bytes will be displayed.
[-is-enabled {true|false}] - Is Policy Enabled
If you specify this parameter, information about is-enabled will be displayed.
[-local-identity <text>] - Local Identity
If you specify this parameter, information about local IKE endpoint's identity, if configured, will be displayed.
[-remote-identity <text>] - Remote Identity
If you specify this parameter, information about remote IKE endpoint's identity, if configured, will be displayed.
[-auth-method <IKE Authentication Method>] - Authentication Method
If you specify this parameter, the authentication method of the policy will be displayed.
[-cert-name <text>] - Certificate for Local Identity
If you specify this parameter, the name of the certificate will be displayed.

Examples​

The this example displays all policies in all Vservers:

cluster-1::> security ipsec policy show
        Policy                                           Cipher
Vserver Name       Local IP Subnet    Remote IP Subnet   Suite          Action
------- ---------- ------------------ ------------------ -------------- -------
vs_data1
        Policy1    192.168.10.1/32    192.168.20.1/32    SUITEB_GCM256  ESP_TRA
        Policy3    192.158.10.10/32   192.158.10.20/32   SUITEB_GCM256  DISCARD
vs_data2
        Policy2    10.10.10.10/32     20.20.20.20/32     SUITE_AESCBC   ESP_TRA
3 entries were displayed.

This example displays all of the IPsec policies from a single Vserver:

cluster-1::> security ipsec policy show -vserver vs_data1
        Policy                                           Cipher
Vserver Name       Local IP Subnet    Remote IP Subnet   Suite          Action
------- ---------- ------------------ ------------------ -------------- -------
vs_data1
        Policy1    192.168.10.1/32    192.168.20.1/32    SUITEB_GCM256  ESP_TRA
        Policy3    192.158.10.10/32   192.158.10.20/32   SUITEB_GCM256  DISCARD
2 entries were displayed.

This example displays a specific policy:

cluster-1::> security ipsec policy show -vserver vs_data1 -name Policy1

                               Vserver Name: vs_data1
                                Policy Name: Policy1
                           Local IP Subnets: 192.168.10.1/32
                          Remote IP Subnets: 192.168.20.1/32
                                Local Ports: 0-0
                               Remote Ports: 0-0
                                  Protocols: any
                                     Action: ESP_TRA
                               Cipher Suite: SUITEB_GCM256
          IKE Security Association Lifetime: 10800
        IPsec Security Association Lifetime: 3600
IPsec Security Association Lifetime (bytes): 0
                          Is Policy Enabled: true
                             Local Identity:
                            Remote Identity:

This example displays a specific field from all policies:

cluster-1::> security ipsec policy show -fields local-ip-subnets
vserver  name    local-ip-subnets
-------- ------- ----------------
vs_data1 Policy1 192.168.10.1/32
vs_data1 Policy3 192.158.10.10/32
vs_data2
         Policy2 10.10.10.10/32
3 entries were displayed.