Skip to main content

security session limit location show

Show per-location session limits

Availability: This command is available to cluster administrators at the advanced privilege level.

Description​

This command shows the per-location management session limits that have been configured for each interface and location.

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
If you specify the -instance parameter, the command displays detailed information about all fields.
[-interface {cli|ontapi|rest}] - Interface
Selects the sessions that match this parameter value. This identifies the interface (CLI, ONTAPI, or REST) to which the limit applies.
[-location <text>] - Location
Selects the sessions that match this parameter value. This identifies the location for the limit. The limit with the location name -default- (only in the Default IPspace) is the limit used for any location (in any IPspace) without a specific configured limit.
[-ipspace <IPspace>] - IPspace of Location
Selects the sessions that match this parameter value. This identifies the IPspace of the client location. The default IPspace is Default.
[-max-active-limit <integer>] - Max-Active Limit
Selects the sessions that match this parameter value. This identifies the configured limit that is used to throttle or reject requests.

Examples​

The following example illustrates displaying the per-location limits for management sessions. 

cluster1::*> security session limit location show 
Interface Location             IPspace     Max-Active
--------- -------------------- ----------- ----------
cli       -default-            Default             16
cli       10.98.16.164         Default              0
ontapi    -default-            Default              6
ontapi    10.98.16.164         Default              0
4 entries were displayed.