network ndp neighbor active-entry delete
Delete active neighbor entry from a System or Admin Vserver
Availability: This command is available to cluster administrators at the advanced privilege level.
Description
The network ndp neighbor active-entry delete command deletes a Network Discovery Protocol (NDP) neighbor entry on the specified port from a given Vserver's subnet group.
Parameters
- -node {<nodename>|local} - Node
- Use this parameter to specify the node on which the neighbor entry is to be deleted.
- -vserver <vserver> - System or Admin Vserver Name
- Use this parameter to specify the System or Admin Vserver on which the neighbor entry is to be deleted.
- -subnet-group <IP Address/Mask> - Subnet Group
- Use this parameter to specify the subnet group from which the neighbor entry is to be deleted.
- -neighbor <IP Address> - Neighbor
- Use this parameter to specify the IPv6 address of the neighbor entry which is to be deleted.
- -port {<netport>|<ifgrp>} - Port
- Use this parameter to specify the port on which the neighbor entry is to be deleted.
Examples
The following example deletes a neighbor entry from the Admin Vserver cluster1:
cluster1::*> network ndp neighbor active-entry delete -vserver cluster1 -node local -subnet-group ::/0 -neighbor
fe80:4::5:73ff:fea0:107 -port e0d
Give documentation feedback