Skip to main content

system controller platform-capability show

Display platform capabilities

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

The system controller platform-capability show command displays information about all platform capabilities for each controller in the cluster. By default, the command displays the following information about all controllers in the cluster:

  • Controller Name

  • Capability ID

  • Capability Supported?

  • Capability Name

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
Displays detailed information about all controllers in the cluster.
[-node {<nodename>|local}] - Node
Selects information about the specified controller.
[-capability-id <integer>] - Capability ID
Selects the desired capability ID.
[-supported <text>] - Supported?
Selects the desired capability support state (true or false).
[-name <text>] - Capability Name
Selects the desired capability name.

Examples​

The following example displays platform capability information for the controller: 

cluster1::> system controller platform-capability show
Node             Capability ID Supported? Capability Name
---------------- ------------- ---------- ------------------------
or-099-diag-01
                 0             false      CAP_CMCI_ENABLED
                 1             false      CAP_HA_CONFIG_ONLY
                 2             true       CAP_SUPPORT_CARD_FRU
                 3             true       CAP_SCORPIO_EN
                 4             false      CAP_NVD_EN
                 5             false      CAP_ENABLE_HPET
                 6             false      CAP_VERIFY_ACPI_TABLE
7 entries were displayed.