Skip to main content

system controller replace show

Display status of controller replacement

Availability: This command is available to cluster administrators at the advanced privilege level.

Description​

The system controller replace show command displays overall information about the currently running, or previously run controller replacement operation. The command displays the following information:

  • Operation Status

  • Error message

  • Recommended action

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
If you specify the -instance parameter, the command displays detailed information about all fields.

Examples​

The following example displays information about automated nondisruptive operation:

cluster1::*> system controller replace show
Node             Status                   Error-Action
---------------- ------------------------ ------------------------------------
node1            Paused-for-intervention  Follow the instructions given in
                                          Step Details
node2            None

Step Details:
--------------------------------------------

Controller replacement operation has been paused for user intervention.
Collect the following info from the current node:
  1.  vserver services name-service dns show
  2.  service-processor show -node * -instance
  3.  network port ifgrp show
  4.  network port vlan show
  5. network interface failover-groups show
  6. storage array config show -switch switchname
  7. storage encryption disk show

  2 entries were displayed.