Skip to main content

system ha interconnect ood status show

Display the high-availability interconnect device out-of-order delivery (OOD) information

Availability: This command is available to cluster administrators at the advanced privilege level.

Description​

The system ha interconnect ood status show command displays configuration information of the out-of-order delivery-capable high-availability interconnect devices. This command is supported only on FAS2500 series nodes in the cluster.

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>,... parameter, the command displays only the fields that you specify.
| [-instance ]}
Use this parameter to display all the fields from all nodes in cluster.
[-node {<nodename>|local}] - Node
Use this parameter to display all the fields from the specified node in the cluster.
[-is-ood-enabled {true|false}] - Is OOD Enabled
Selects the nodes that match this parameter value.
[-is-coalescing-enabled {true|false}] - Is Coalescing Enabled
Selects the nodes that match this parameter value.

Examples​

The following example displays the HA interconnect device out-of-order delivery configuration information on FAS2500 series nodes in the cluster.

cluster1::*> system ha interconnect ood status show

                  Node: ic-f2554-03
              NIC Used: 0
        Is OOD Enabled: true
 Is Coalescing Enabled: true

                  Node: ic-f2554-04
              NIC Used: 0
        Is OOD Enabled: true
 Is Coalescing Enabled: true
2 entries were displayed.