Skip to main content

template provision

Provision Data ONTAP resources using the template

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

The command template provision provisions ONTAP system based on the template that is passed as an input to the template parameter. A wizard is presented which will accept the required inputs.

Parameters​

-name <template name> - Name of the template
This parameter specifies the name of the template
[-simulate {true|false}] - Simulate
If this parameter is specified, the provisioning is just simulated and there will be no changes done to the system.

Examples​

The following example provisions a vserver with required protocols using template.

    cluster-1::> template provision -name VserverEnvironmentSetup
    Press Ctrl+C to abort.
    ********************
    * Setup of vserver *
    ********************
    Vserver Name: vs0
    Vserver Language [C.UTF-8]:
    Vserver Security Style [unix]:
    Vserver IPSpace [Default]:

    ******************************
    * Setup of network.interface *
    ******************************
    Enter number of instances for object network.interface: 2
    (1/2)LIF Protocol: nfs
    (1/2)IP Addr: 1.1.1.1
    (1/2)NetMask: 255.255.255.0
    (1/2)Node Name: node1-vsim1
    (1/2)Port: e0c
    (2/2)LIF Protocol: nfs
    (2/2)IP Addr: 1.1.1.1
    (2/2)NetMask: 255.255.255.0
    (2/2)Node Name: node1-vsim1
    (2/2)Port: e0c

    ***************************
    * Setup of network.routes *
    ***************************
    Enter number of instances for object network.routes: 1
    (1/1)Gateway: 1.1.1.1

    ***********************
    * Setup of access.dns *
    ***********************
    Search Domain: netapp.com
    DNS IP Addresses List: 1.1.1.1

    *************************
    * Setup of security.nis *
    *************************
    NIS Domains: netapp.com
    NIS IP Address: 1.1.1.1

    *********************
    * Setup of security *
    *********************
    LDAP Client Config: ldapconfig
    LDAP Server IP: 1.1.1.1
    LDAP Base DN: dc=examplebasedn

    **********************
    * Setup of protocols *
    **********************
    Protocols to configure: nfs
    [Job 15] Configuring vserver for vs0 (100%)