Skip to main content

autobalance aggregate config show

Display the Auto Balance Aggregate feature configuration

Availability: This command is available to cluster administrators at the advanced privilege level.

Description​

The autobalance aggregate config show command displays information about parameters that determine when volumes should be considered for automatic move or recommendation by the Auto Balance Aggregate feature.

Examples​

The following example displays the default configuration for the Auto Balance Aggregate feature

cluster1::*> autobalance aggregate config show
              Is the Auto Balance Aggregate Feature Enabled: false
      Threshold When Aggregate Is Considered Unbalanced (%): 70
        Threshold When Aggregate Is Considered Balanced (%): 40

At the diagnostic level, the output displays the information below.

                       Is the Auto Balance Aggregate Feature Enabled: false
                          Mode of the Auto Balance Aggregate Feature: recommend
                                                    Polling Interval: 3600
               Threshold When Aggregate Is Considered Unbalanced (%): 70
                 Threshold When Aggregate Is Considered Balanced (%): 40
                                  Volume Operations Threshold (IOPS): 100
               Volume Operations Threshold Not Exceeded for Duration: 24
                                 Volume Not Moved Again for Duration: 48