Skip to main content

metrocluster configuration-settings show-status

Display the configuration settings status for a MetroCluster setup

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

The metrocluster configuration-settings show-status command displays the configuration settings status for nodes in a MetroCluster setup. If a DR group has not been created, then status for nodes in the local cluster only are displayed.

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>,... parameter, the command displays only the fields that you specify.
| [-instance ]}
If this parameter is specified, the command displays detailed information about all entries.
[-cluster-uuid <UUID>] - Cluster UUID
If this parameter is specified, the command displays detailed information about all nodes in the cluster matching the specified cluster-uuid.
[-cluster <Cluster name>] - Cluster Name
If this parameter is specified, the command displays detailed information about all the nodes in the specified cluster.
[-node <text>] - Node Name
If this parameter is specified, the command displays information for the matching nodes.
[-configuration-status <text>] - Configuration Settings Status
If this parameter is specified, the command displays detailed information about all nodes with the specified configuration status.
[-config-error-info <text>] - Configuration Error Information
If this parameter is specified, the command displays detailed information about all nodes with the specified configuration error information.

Examples​

The following example shows the display of MetroCluster setup status:

        
    
 Nodes do not have a valid platform-specific personality value (equivalent to HAOSC parameter on non-Apollo platforms) for a MetroCluster setup.
    

clusA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ --------------------------------
   clusA                      A1                 not a MetroCluster setup
                              A2                 not a MetroCluster setup
2 entries were displayed.


    
MetroCluster setup uses FC links rather than IP link:
    

clusA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ --------------------------------
clusA                      A1                 not applicable for FC and SAS
                           A2                 not applicable for FC and SAS
2 entries were displayed.


    
Output of the command when MetroCluster setup uses IP links and before <span className="keyword cmdname">"metrocluster configuration-settings dr-group create"</span> command is run:
    

clusA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ --------------------------------
clusA                      A1                 ready for DR group create
                           A2                 ready for DR group create
2 entries were displayed.


    
Output of the command after <span className="keyword cmdname">"metrocluster configuration-settings dr-group create"</span> command is run:
    

clusA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ ---------------------------------
clusA
                           A1                 ready for interface create
                           A2                 ready for interface create
clusB
                           B1                 ready for interface create
                           B2                 ready for interface create
4 entries were displayed.


    
Output of the command after <span className="keyword cmdname">"metrocluster configuration-settings interface create"</span> command is run for every node:
    

clusA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ ---------------------------------
clusA
                           A1                 ready for next interface create
                           A2                 ready for connection connect
clusB
                           B1                 ready for connection connect
                           B2                 ready for connection connect
4 entries were displayed.


    
 Output of the command after <span className="keyword cmdname"> "metrocluster configuration-settings connection connect" </span> command is run:
    

usA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ ---------------------------------
clusA
                           A1                 completed
                           A2                 completed
clusB
                           B1                 completed
                           B2                 completed
4 entries were displayed.


    
 Output of the command after <span className="keyword cmdname"> "metrocluster configuration-settings connection connect"</span> command is run and there are connection errors:
    

clusA::> metrocluster configuration-settings show-status
Cluster                    Node               Configuration Settings Status
-------------------------- ------------------ --------------------------------
clusA                      A1                 connection error
                           A2                 completed
clusB                      B1                 connection error
                           B2                 completed
4 entries were displayed.