Skip to main content

network bgp config show

Display BGP configuration

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

The network bgp config show command displays the border gateway protocol (BGP) configuration for each node.

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
If you specify the -instance parameter, the command displays detailed information about all fields.
[-node {<nodename>|local}] - Node
This parameter selects the BGP configurations that match the specified node.
[-asn <integer>] - Autonomous System Number
This parameter selects the BGP configurations that match the specified autonomous system number.
[-hold-time <integer>] - Hold Time
This parameter selects BGP configurations that match the specified hold time.
[-router-id <IP Address>] - Router ID
This parameter selects the BGP configurations that match the specfied router ID.

Examples​

        cluster1::> network bgp config show
                Autonomous
                System      Hold Time
        Node        Number      (seconds)   Router ID
        --------------- --------------- --------------- ---------
        node1       10      180     10.0.1.112