Skip to main content

network interface service-policy modify-service

Modify a service entry in an existing service policy

Availability: This command is available to cluster administrators at the advanced privilege level.

Description​

The network interface service-policy modify-service command modifies the policy-specific attributes of a service that is already included in a particular service policy. Other services in the policy are not impacted by the change.

Parameters​

-vserver <vserver name> - Vserver
Use this parameter to specify the name of the Vserver of the service policy to be updated.
-policy <text> - Policy Name
Use this parameter to specify the name of service policy to be updated.
-service <LIF Service Name> - Service entry to be modified
Use this parameter to specify the name of service to be updated.
-allowed-addresses <IP Address/Mask>, ... - Allowed address ranges for the service
Use this parameter to specify a list of subnet masks for addresses that are allowed to access this service. Use the value 0.0.0.0/0 to represent the wildcard IPv4 address and ::/0 to represent the wildcard IPv6 address.

Examples​

The following example shows the modification of a service on an existing service policy.

cluster1::> network interface service-policy show -vserver cluster1
Vserver   Policy                     Service: Allowed Addresses
--------- -------------------------- ----------------------------------------
cluster1
          default-intercluster       intercluster-core: 0.0.0.0/0
                                     management-https: 0.0.0.0/0

          default-management         management-core: 0.0.0.0/0
                                     management-autosupport: 0.0.0.0/0
                                     management-ssh: 0.0.0.0/0
                                     management-https: 0.0.0.0/0

          default-route-announce     management-bgp: 0.0.0.0/0

3 entries were displayed.

cluster1::> network interface service-policy modify-service -vserver cluster1 -policy default-management -service management-ssh -allowed-addresses 10.1.0.0/16

cluster1::> network interface service-policy show -vserver cluster1
Vserver   Policy                     Service: Allowed Addresses
--------- -------------------------- ----------------------------------------
cluster1
          default-intercluster       intercluster-core: 0.0.0.0/0
                                     management-https: 0.0.0.0/0

          default-management         management-core: 0.0.0.0/0
                                     management-autosupport: 0.0.0.0/0
                                     management-ssh: 10.1.0.0/16
                                     management-https: 0.0.0.0/0

          default-route-announce     management-bgp: 0.0.0.0/0

3 entries were displayed.