Skip to main content

qos statistics volume resource cpu show

Display CPU resource utilization data per volume

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

The qos statistics volume resource cpu show command displays the CPU utilization for volumes per node.

The command displays the following data:

  • The QoS volume name (Workload)
  • The QoS workload ID (ID)
  • CPU utilization observed in percentage (CPU)
The results displayed per iteration are sorted by total CPU utilization. Each iteration starts with a row that displays the total CPU utilization across all volumes.

Parameters​

-node {<nodename>|local} - Node
Selects the volumes that match this parameter value.
{ [-rows <integer>] - Number of Rows in the Output
Specifies the number of busiest QoS policy groups to display. The default setting is 10. The allowed range of values is 1 to 20.
| -vserver <vserver name> - Vserver Name
Specifies the Vserver to which the volume belongs.
-volume <volume name>} - Volume Name
Selects the CPU utilization data that match this parameter value. Enter a complete volume name or press the <Tab> key to complete the name. Wildcard query characters are not supported.
[-iterations <integer>] - Number of Iterations
Specifies the number of times the display is refreshed before terminating. If you do not specify this parameter, the command iterates until interrupted by Ctrl-C.
[-refresh-display {true|false}] - Toggle Screen Refresh Between Each Iteration
Specifies the display style. If true, the command clears the display after each data iteration. If false, the command displays each data iteration below the previous one. The default is false.
[-show-flexgroup-as-constituents {true|false}] - Display Flexgroups as Constituents
If the parameter is specified and if the value is true, it will display data for FlexVols and Flexgroup Constituents. Otherwise it will display data for FlexVols and Flexgroups.

Examples​

    cluster1::> qos statistics volume resource cpu show -node nodeA -iterations 100 -rows 3
    Workload           ID   CPU
    --------------- ----- -----
    --total- (100%)     -    9%
    vs0vol1-wid-102   102    5%
    vs0vol2-wid-121   121    2%
    vs2_vol0-wid-..   212    2%
    -total- (100%)      -    8%
    vs0vol1-wid-102   102    5%
    vs0vol2-wid-121   121    2%
    vs2_vol0-wid-..   212    1%
The example above displays total CPU utilization for the 3 volumes with the highest CPU utilization and it refreshes the display 100 times before terminating.
    cluster1::> qos statistics volume resource cpu show -node local -vserver vs0 -volume vs0_vol1 -iterations 100
    Workload           ID   CPU
    --------------- ----- -----
    -total- (100%)      -    2%
    vs0_vol1-wid7..  7916    2%
    -total- (100%)      -    2%
    vs0_vol1-wid7..  7916    2%
    -total- (100%)      -    1%
    vs0_vol1-wid7..  7916    1%
    -total- (100%)      -    2%
    vs0_vol1-wid7..  7916    1%
    -total- (100%)      -    2%
    vs0_vol1-wid7..  7916    2%

The following example shows the output when the session privilege level is "diagnostic".

    cluster1::*> qos statistics volume resource cpu show -node nodeB -iterations 100 -rows 3
    Workload           ID   CPU Wafl_exempt Kahuna Network Raid  Exempt Protocol
    --------------- ----- ----- ----------- ------ ------- ----- ------ --------
    -total- (200%)      -   23%          0%     0%      0%    0%    18%       5%
    vs0vol1-wid-102   102   18%          0%     0%      0%    0%    15%       3%
    vs0vol2-wid-121   121    3%          0%     0%      0%    0%     2%       1%
    vs2_vol0-wid-..   212    2%          0%     0%      0%    0%     1%       1%
    -total- (200%)      -   24%          0%     0%      0%    0%    19%       5%
    vs0vol1-wid-102   102   19%          0%     0%      0%    0%    16%       3%
    vs0vol2-wid-121   121    3%          0%     0%      0%    0%     2%       1%
    vs2_vol0-wid-..   212    2%          0%     0%      0%    0%     1%       1%