Skip to main content

security session limit show

Show default session limits

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

This command shows the default management session limits that have been configured for each interface and category.

Parameters​

{ [-fields <fieldname>, ...]
If you specify the -fields <fieldname>, ... parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-instance ]}
If you specify the -instance parameter, the command displays detailed information about all fields.
[-interface {cli|ontapi|rest}] - Interface
Selects the sessions that match this parameter value. This identifies the interface (CLI, ONTAPI, or REST) to which the limit applies.
[-category {application|location|request|user|vserver}] - Category
Selects the sessions that match this parameter value. This identifies the category for the limit. The following categories are supported: application, location, request, user, and Vserver.
[-max-active-limit <integer>] - Max-Active Limit
Selects the sessions that match this parameter value. This identifies the configured limit that is used to throttle or reject requests.

Examples​

The following example illustrates displaying the default limits for management sessions. 

cluster1::> security session limit show
Interface Category    Max-Active
--------- ----------- ----------
cli       user                 2
cli       vserver              4
ontapi    vserver              2
3 entries were displayed.