system ha interconnect port show

Description​

The system ha interconnect port show command displays the high-availability interconnect device port physical layer and link layer status information.

Parameters​

{ [-fields <fieldname>, ...]

If you specify the -fields <fieldname>,... parameter, the command displays only the fields that you specify.

| [-instance ]}

Use this parameter to display all the fields from all nodes in the cluster.

[-node {<nodename>|local}] - Node

Use this parameter to display all the fields from the specified node in the cluster.

[-link-monitor {on|off}] - Link Monitor Detection

Selects the nodes that match this parameter value.

[-port <integer>, ...] - Port Number

Selects the nodes that match this parameter value.

[-phy-layer-state {invalid|sleep|polling|disabled|port-configuration-testing|linkup|link-error-recovery|phytest|reserved}, ...] - Physical Layer State

Selects the nodes that match this parameter value.

[-link-layer-state {invalid|down|initialize|armed|active|reserved}, ...] - Link Layer State

Selects the nodes that match this parameter value.

[-phy-link-up-count <integer>, ...] - Physical Link Up Count

Selects the nodes that match this parameter value. The value is total number of times the link on a given port is transitioned up.

[-phy-link-down-count <integer>, ...] - Physical Link Down Count

Selects the nodes that match this parameter value. The value is total number of times the link on a given port is transitioned down.

[-is-active-link {true|false}, ...] - Is the Link Active

Selects the nodes that match this parameter value. The value true means the interconnect data channels are established on this link.