Skip to main content

system snmp authtrap

Enables or disables SNMP authentication traps

Availability: This command is available to cluster administrators at the admin privilege level.

Description​

Use this command to either enable or disable the standard SNMP authentication failure traps.

Parameters​

[-authtrap <integer>] - Enables SNMP Authentication Trap
Enter the value of 1 to enable SNMP authentication failure traps. By default, SNMP authentication trap is disabled and the value is 0.

Examples​

The following example demonstrates how to set the SNMP authtrap. 

    
    cluster1::> system snmp authtrap -authtrap 1

    cluster1::> system snmp show
    contact:
            private
    location:
            NB
    authtrap:
            1
    init:
            0
    traphosts:
            -
    community:
               -   -