Skip to main content

180-901-000 : Check-point Panel Test Failed

Check-point Panel Test Failed

Severity​

Error

Serviceable​

Yes

Recoverable​

No

Automatically Notify Support​

No

User Action​

Complete the following steps:

  1. Check the operator information panel cabling for loose or broken connections at both ends or damage to the cable.
  2. Replace the information panel cable if damage is present.
  3. Run the test again.
  4. Replace the operator information panel assembly.
  5. Run the test again.
  6. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.