Skip to main content

806f000f-220102ff : Subsystem [MemoryElementName] has insufficient memory for operation. (ABR Status)

Subsystem [MemoryElementName] has insufficient memory for operation. (ABR Status)

This message is for the use case when an implementation has detected that the usable Memory is insufficient for operation.

May also be shown as 806f000f220102ff or 0x806f000f220102ff

Severity​

Error

Alert Category​

Critical - Memory

Serviceable​

Yes

CIM Information​

Prefix:PLAT

and ID:0132

SNMP Trap ID​

41

Automatically Notify Support​

No

User Response​

  1. Make sure the server meets the minimum configuration to start (see Power-supply LEDs).
  2. Update the server firmware on the primary page. Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the code.
  3. (Trained technician only) Replace the system board.
Firmware Error : Sys Boot Status : X8 PCI 2 Firm : X8 PCI 3 Firm :