Skip to main content

Front view

The following illustrations show the controls, LEDs, and connectors on the front of your server model.

Figure 1. Front view: HX1310, HX3310, and HX3310-F
Front view: HX1310, HX3310, and HX3310-F

Figure 2. Front view: HX2310-E
Front view: HX2310-E
  • Rack release latches: Press the latches on each front side of the server to remove the server from the rack.
  • Hard disk drive activity LEDs: This LED is used on hot-swap SAS or SATA hard disk drives. Each hot-swap hard disk drive has an activity LED, and when this LED is flashing, it indicates that the drive is in use.
  • Hard disk drive status LEDs: This LED is used on hot-swap SAS or SATA hard disk drives. When this LED is lit, it indicates that the drive has failed.
  • Operator information panel: Use this information for an overview of the connectors, LEDs, and buttons on the server front operator panel.
  • LCD system information display panel: Use this information for an overview of the LCD system information display panel, which displays various types of information about the server.
  • Video connector: Connect a monitor to this connector. The video connectors on the front and rear of the server can be used simultaneously.
    Note
    The maximum video resolution is 1600 x 1200 at 75 Hz.
  • USB connectors: Connect a USB device, such as a USB mouse or keyboard to any of these connectors.