Removing the EIA bracket

Use this information to remove the EIA bracket.

1. Read the safety information that begins on Safety and Installation guidelines.
2. If necessary, turn off the server and peripheral devices and disconnect the power cords and all external cables.
3. If the server has been installed in a rack, slide the server out from the rack enclosure.
4. Remove the screws from the EIA bracket.
   Note

   Use the T8 torx wedge to remove the screws.

   Figure 1. Screw removal
   

   

   
   
5. Slightly side the EIA bracket to the right; then, remove it from the chassis.
   Figure 2. EIA bracket removal