Skip to main content

Chassis specifications

Summary of the specifications of the chassis.

Technical specifications​

Table 1. Chassis technical specifications
SpecificationDescription
Electrical input

The system supports up to three hot-swap power supplies:

  • CRPS 1300-watt Titanium v1.1, input power 200-240V
  • CRPS 2700-watt Platinum v1.3, input power 200-240V
  • CRPS 2700-watt Platinum v1.4, input power 200-240V
  • CRPS Premium (CFFv5) 2000-watt Titanium, input power 200-240V
  • CRPS Premium (CFFv5) 2700-watt Titanium, input power 200-240V
Supported power supply configurations:

  • 3 PSUs: 2+1 (optional redundancy)

  • 2 PSUs: 1+1 (optional redundancy)

  • 1 PSU: 1+0 (only supported on CRPS Premium (CFFv5) 2700-watt Titanium)

Note
  • CRPS Premium (CFFv5) PSUs support over-subscription.
  • The actual power efficiency depends on system configuration.
Important
  • CRPS power supply units in the chassis must have the same vendor, wattage, and part number (or alternate part number).
  • CRPS Premium (CFFv5) power supply units in the chassis must have the same wattage, and part number (or alternate part number).

Mechanical specifications​

Important

For safety, make sure that there is no node or power supply unit installed in the chassis when removing or installing the chassis from or to the rack.

Table 2. Chassis mechanical specifications
SpecificationDescription
Dimension
2U rack-mounted chassis (2U4N)
  • Height: 87 mm (3.43 inches)
  • Depth: 898 mm (35.36 inches)
  • Width: 448 mm (17.64 inches)
  • Weight:
    • Empty chassis (with chassis midplane and PSU cage): 11.83 kg (26.08 lbs)
    • Maximum (with four 1U nodes and three CRPS power supplies installed): approximately 42.37 kg (93.41 lbs)
Note

For the supported nodes for the chassis, see Chassis front view.