Front view
The following illustration shows the front view of the DM5100F with the front bezel removed.
Front view without bezel
Figure 1. Front view without bezel
![Front view without bezel](DM5100F_front_LEDs.png)
![Front view without bezel](DM5100F_front_LEDs.png)
1 Chassis power LED | 2 System attention LED |
3 Location LED | 4 Drive activity LED |
5 Drive fault LED | 6 Shelf ID |
1 Chassis power LED
The power status LED helps you to determine the current power status.
Status | Color | Description |
---|---|---|
Solid on | Green | The system is on and running. |
Off | None | No power supply is delivering power to the system. |
2 System attention LED
The system attention LED provides basic diagnostic functions for your storage system. If the system attention LED is lit, one or more LEDs elsewhere in the system might also be lit to direct you to the source of the error.
Status | Color | Description | Action |
---|---|---|---|
On | Yellow | An error has been detected on the system. Causes might include but not limited to the following errors:
| Check the event log to determine the exact cause of the error. |
Off | None | The system is off, or the system is on and working correctly. | None. |
3 Location LED
The blue system location LED is used to visually locate a system.
4 Drive activity LED
The drive activity LED is used to determine the status of a drive.
Status | Color | Description | Action |
---|---|---|---|
On | Green | Drive has power. | None. |
Blinking | Green | Drive servicing IO. | None. |
5 Drive fault LED
The drive fault LED is used to determine the status of a drive.
Status | Color | Description | Action |
---|---|---|---|
On | Amber | An error has occurred with the drive. | Replace the drive. |
Blinking | Amber | Drive rebuild action is underway. | None. |
Off | None | The drive is working normally. | None. |
6 Shelf LED
The shelf ID is used to show the ID number of the shelf. Each shelf in a configuration needs to have a unique ID.
Give feedback