You must remove the existing chassis from the equipment rack or system cabinet before you can install the replacement chassis.
About this task
A video for this task is available at:
- Remove the screws from the chassis mount points.
If the system is in a system cabinet, you might need to remove the rear tie-down bracket.
- With the help of two or three people, slide the old chassis off the rack rails in a system cabinet or L brackets in an equipment rack and set it aside.
- If you are not already grounded, properly ground yourself.
- Using two or three people, install the replacement chassis into the equipment rack or system cabinet by guiding the chassis onto the rack rails in a system cabinet or L brackets in an equipment rack.
- Slide the chassis all the way into the equipment rack or system cabinet.
- Secure the front of the chassis to the equipment rack or system cabinet, using the screws you removed from the old chassis.