Skip to main content

Preparing for installation

To install your system, you need to create an account and register the system. You also need to inventory the appropriate number and type of cables for your system and collect specific network information.

Before you begin

You need to have access to the Lenovo Press for information about site requirements as well as additional information on your configured system. You might also want to access the Release Notes on the Lenovo Support Site for your version of ONTAP for more information about this system.

Lenovo press

You need to provide the following at your site:

  • Rack space for the storage system
  • Phillips #2 screwdriver
  • Additional networking cables to connect your system to your network switch and laptop or console with a Web browser
  1. Unpack the contents of all boxes.
  2. Record the system serial number for your system.


  3. Inventory and make a note of the number and types of cables you received.
    The following table identifies the types of cables you might receive. If you receive a cable not listed in the table, see the Lenovo Press to locate the cable and identify its use.

    Lenovo press

    Type of cable...Part number and lengthConnector typeFor...
    100 GbE cable (QSF(28)

    7Z57A03561, 1m

    7Z57A03562, 3m

    7Z57A03563, 5m

    		Storage, cluster interconnect/HA, and Ethernet data (order-dependent)
    25 GbE cable (SFP28s)

    7Z57A03557, 1m

    7Z57A03558, 3m

    7Z57A03559, 5m

    		GbE network connection (order-dependent)
    Storage Cables

    00YL837, 5M

    00YL838, 1M

    00YL840, 3M

    		mini-SAS HD to mini-SAS HD cables (order-dependent)
    Optical cables

    4Z57A10845, .5M LC-LC OM4

    4Z57A10846, 1M LC-LC OM4

    4Z57A10847, 3M LC-LC OM4

    4Z57A10848, 5M LC-LC OM4

    4Z57A10849, 10M LC-LC OM4

    4Z57A10850, 15M LC-LC OM4

    4Z57A10851, 25M LC-LC OM4

    4Z57A10852, 30M LC-LC OM4

    		16 Gb FC or 25GbE cables for mezzanine cards (order-dependent)
    RJ-45 (order dependant)VariousManagement network
    Micro-USB console cableNot applicableConsole connection used during software setup if laptop or console does not support network discovery.
    Power cablesNot applicablePowering up the system
  4. Collect the following information to be used in the setup of your DM series system:
    This worksheet prepares you to gather information needed to setup the storage system.
    Table 1. Storage system information
    Storage system name 
    Password for admin account <e.g Eight characters long, must contain at least one letter and one number, special characters are allowed> 
    LicenseLicense will be present on system on new factory orders. If license information is needed after initial setup, go to Lenovo Key Management System and click Retrieve history.
    TCP/IP addresses for cluster and node management (3 total for e0M) 
    TCP/IP addresses for BMC/SP remote management interfaces (2 total for BMC/SP) 
    DNS domain names and DNS server IP address 
    NTP network time services host name or IP address 
    SMTP mail host and email address for notifications 
    SNMP trap host 
    System logs (syslog) server 
    SVM names(s) 
    Setup information for data protocol(s)

    SAN — host side initiators

    NAS — TCP/IP addresses