Parts list

Use the parts list to identify each of the components that are available for your solution.

For more information about ordering parts:

Go to Lenovo Data Center Support and navigate to the support page for your solution.
Click Parts.
Enter the serial number to view a listing of parts for your solution.

It is highly recommended that you check the power summary data for your solution using Lenovo Capacity Planner before purchasing any new parts.

Note

Depending on the model, your solution might look slightly different from the illustration.

The parts listed in the following table are identified as one of the following:

Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your solution.
Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.
Consumable and Structural parts: Purchase and replacement of consumable and structural parts (components, such as a cover or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Enclosure parts list

Figure 1. Enclosure parts list

Table 1. Enclosure parts list
Index	Description	Tier 1 CRU	FRU
For more information about ordering parts: Go to Lenovo Data Center Support and navigate to the support page for your solution. Click Parts. Enter the serial number to view a listing of parts for your solution.
`1`	6U enclosure assembly		√
`2`	Lift handle		√
`3`	Upper EMC shield		√
`4`	Lower EMC shield		√
`5`	Manifold assembly		√
`6`	Drip sensor tray		√
`7`	Drip sensor assembly		√
`8`	System Management Module 2		√
`9`	Power supply	√
`10`	DWC PSU manifold bottom bracket		√
`11`	DWC PSU manifold top bracket		√
`12`	DWC PSU		√
`13`	DWC PSU bracket and stopper		√
`14`	DWC PSU manifold		√
`15`	PSU cage filler		√
`16`	DWC PSU filler		√
`17`	Manifold retention bracket		√
`18`	Enclosure shipping bracket		√
`19`	PSU cage		√
`20`	High-power midplane		√
`21`	Support bracket		√
`22`	External LCD diagnostics handset	√
`23`	Cable		√
`24`	EIA cover left		√
`25`	EIA cover right		√

Give documentation feedback