Commands for configuring hardware-assisted takeover
There are specific ONTAP commands for configuring the hardware-assisted takeover feature.
| If you want to... | Use this command... |
|---|---|
| Disable or enable hardware-assisted takeover | storage failover modify hwassist |
| Set the partner address | storage failover modify hwassist‑partner‑ip |
| Set the partner port | storage failover modify hwassist‑partner‑port |
| Specify the interval between heartbeats | storage failover modify hwassist‑health‑check‑interval |
| Specify the number of times the hardware-assisted takeover alerts are sent | storage failover modify hwassist‑retry‑count |
Give documentation feedback