Removing MetroCluster configurations

You can remove the MetroCluster configuration that is being monitored by the Tiebreaker software when you no longer want to monitor a MetroCluster configuration.

1. Use the Tiebreaker CLI monitor remove command to remove the MetroCluster configuration.

   Example

   In the following example, cluster_A is removed from the software:

   MetroCluster Tiebreaker :> monitor remove -monitor-name cluster_A
   Successfully removed monitor from MetroCluster Tiebreaker
   software.
   
   
2. Confirm that the MetroCluster configuration is removed properly by using the Tiebreaker CLI monitor show -status command.

   Example

   MetroCluster Tiebreaker :> monitor show -status