IPMI-Befehl

Der Abschnitt enthält Informationen zu IPMI-Befehlen.

Anmerkung

IPMI über RMCP+ oder RMCP ist durch OOB-Kommunikation über die physische Schnittstelle, den Ethernet-Port, verfügbar.

Tabelle 1. IPMI-Befehlsliste
NetFn	CMD	Name
0x32	0x90	GET PSU COLLECTED DATA
0x32	0x91	GET PSU STATUS
0x32	0x94	GET FAN GPIO
0x32	0x95	SET FAN GPIO
0x32	0x96	GET SYS LED
0x32	0x97	SET SYS LED
0x32	0x98	GET NODE POWER READING
0x32	0x99	GET NODE SIZE
0x32	0x9B	SET ACOUSTIC MODE (gilt nur für DA240 Gehäuse)
0x32	0x9D	GET CAP BOUNDARY
0x32	0x9E	SET CAP VALUE
0x32	0x9F	SET CAP STATE
0x32	0xA0	GET CAP STATE
0x32	0xA1	SET DATE TIME
0x32	0xA2	GET PSU POLICY OVS
0x32	0xA3	SET PSU POLICY OVS
0x32	0xA4	SET NODE RESET / RESEAT
0x32	0xA5	GET PSU FAN STATUS
0x32	0xA6	BACKUP / RESTORE
0x32	0xA7	GET NODE STATUS
0x32	0xA8	GET SMM2 STATUS
0x32	0xA9	SET NODE RESTORE POLICY
0x32	0xAA	GET NODE RESTORE POLICY
0x32	0xAB	SET PSU ZERO OUTPUT MODE
0x32	0xAC	GET PSU ZERO OUTPUT MODE
0x32	0xAD	SMM2 RESET TO DEFAULT
0x32	0xAF	SET VPD
0x32	0xB0	GET VPD
0x32	0xB1	FFDC DUMP
0x32	0xB2	SET SMTP CONFIG PARAMETERS
0x32	0xB3	GET SMTP CONFIG PARAMETERS
0x32	0xB4	SET NTP CONFIG PARAMETERS
0x32	0xB5	GET NTP CONFIG PARAMETERS
0x32	0xC3	GET PSU DATA
0x32	0xC7	GET NODE COOLING VALUE
0x32	0xF0	GET WEB STATE
0x32	0xF1	SET WEB STATE
0x32	0xF4	PSU ISP PSU SELECT
0x32	0xF5	ENCLOSURE VIRTUAL RESEAT
0x32	0xF6	SET SYSTEM ENCLOSURE LRU
0x32	0xFA	GET SECURITY OPTION
0x32	0xFB	SET SECURITY OPTION

Feedback geben