Skip to main content

Deleting an interface group

You can delete interface groups if you want to configure LIFs directly on the underlying physical ports or decide to change the interface group mode or distribution function.

Before you begin

  • The interface group must not be hosting a LIF.

  • The interface group must be neither the home port nor the failover target of a LIF.

Use the network port ifgrp delete command to delete an interface group.

For more information about this command, see the man pages.

Example

The following example shows how to delete an interface group named a0b:

cluster-1::> network port ifgrp delete -node cluster-1-01 -ifgrp a0b