Skip to main content

Verifying the status of netgroup definitions

After loading netgroups into the SVM, you can use the vserver services name-service netgroup status command to verify the status of netgroup definitions. This enables you to determine whether netgroup definitions are consistent on all of the nodes that back the SVM.

  1. Set the privilege level to advanced: set -privilege advanced
  2. Verify the status of netgroup definitions: vserver services name-service netgroup status

    You can display additional information in a more detailed view.

  3. Return to the admin privilege level: set -privilege admin

Example​

After the privilege level is set, the following command displays netgroup status for all SVMs:

vs1::> set -privilege advanced

Warning: These advanced commands are potentially dangerous; use them only when
         directed to do so by technical support.
Do you wish to continue? (y or n): y

vs1::*> vserver services name-service netgroup status
Virtual
Server    Node            Load Time           Hash Value
--------- --------------- ------------------- --------------------------------
vs1
          node1           9/20/2020 16:04:53  e6cb38ec1396a280c0d2b77e3a84eda2
          node2           9/20/2020 16:06:26  e6cb38ec1396a280c0d2b77e3a84eda2
          node3           9/20/2020 16:08:08  e6cb38ec1396a280c0d2b77e3a84eda2
          node4           9/20/2020 16:11:33  e6cb38ec1396a280c0d2b77e3a84eda2