Skip to main content

System-board switches and jumpers

The following illustration shows the location and description of the switches and jumpers.

Figure 1. Location and description of switches and jumpers
Location and description of switches and jumpers
Note
If there is a clear protective sticker on the top of the switch blocks, you must remove and discard it to access the switches.
Note
  1. Before you change any switch settings or move any jumpers, turn off the server. Review the information in Safety, Installation guidelines, Handling static-sensitive devices, and Turning off the compute node.
  2. Any system-board switch or jumper block that is not shown in the illustrations in this document are reserved.