Before you delete a LIF, you should ensure that the host connected to the LIF can access the LUNs through another path.
Before you begin
If the LIF you want to delete is a member of a port set, you must first remove the LIF from the port set before you can delete the LIF.
- Verify the name of the LIF and current port to be deleted: network interface show –vserver vserver_name
- Delete the LIF: network interface delete
Example network interface delete -vserver vs1 -lif lif1
- Verify that you deleted the LIF: network interface show
Example network interface show -vserver vs1
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
------- ---------- ---------- ---------------- --------- ------- ----
vs1
lif2 up/up 192.168.2.72/24 node-01 e0b true
lif3 up/up 192.168.2.73/24 node-01 e0b true