Deleting one or more existing Snapshot copies from a volume

You can manually delete one or more existing Snapshot copies from the volume. You might want to do this if you need more space on your volume.

1. Use the volume snapshot show command to verify which Snapshot copies you want to delete.
   Example

   cluster::> volume snapshot show -vserver vs3 -volume vol3
   
                                                   ---Blocks---
   Vserver  Volume  Snapshot                Size   Total% Used%
   -------- ------- ----------------------- -----  ------ -----
   vs3      vol3
                    snap1.2013-05-01_0015   100KB   0%    38%
                    snap1.2013-05-08_0015   76KB   0%    32%
                    snap2.2013-05-09_0010   76KB   0%    32%
                    snap2.2013-05-10_0010   76KB   0%    32%
                    snap3.2013-05-10_1005   72KB   0%    31%
                    snap3.2013-05-10_1105   72KB   0%    31%
                    snap3.2013-05-10_1205   72KB   0%    31%
                    snap3.2013-05-10_1305   72KB   0%    31%
                    snap3.2013-05-10_1405   72KB   0%    31%
                    snap3.2013-05-10_1505   72KB   0%    31%
   10 entries were displayed.
   
2. Use the volume snapshot delete command to delete all of the Snapshot copies.
   Example

   cluster::> volume snapshot delete -vserver vs3 -volume vol3 *
   10 entries were acted on.