Zum Hauptinhalt springen

FQXPMUP0204M : BMC communication failed: Execute the update command failure. Failed to update the firmware.

BMC communication failed: Execute the update command failure. Failed to update the firmware.

This message is reported when executing the update command failed.

Severity​

Error

User Action​

  1. Restart BMC via supported method.
  2. Reflash BMC firmware.
  3. Perform AC reset or virtual reseat.
    Note
    When performing AC reset, after powering off AC, wait for several seconds before powering on AC. After AC power is restored, power on the host system.
  4. If the problem persists, try a different Lenovo tool to perform the update (e.g., XClarity Administrator, XClarity Controller, or XClarity Essential OneCLI).
  5. If the problem persists, contact technical support.