FQXSPIO0037G : Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [MCIOorMXIOConnectName].
Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [MCIOorMXIOConnectName].
This message is for the use case when an implementation has detected that a device cable has been missconnected.
Severity
Warning
Alert Category
Warning - Other
Serviceable
Yes
SNMP Trap ID
60
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
- Reseat the signal cable or power cable of the affected riser card.
- Refer to the message to connect the signal cable to the correct connector. Refer to Cable Routing Guide for information on how to connect the cables.
- Update the server firmware (UEFI and XCC) and adapter firmware.
- If the problem persists, collect service data log.
- Contact Lenovo Support.
Enviar feedback