Install the SMM2

Use this information to install the SMM2.

About this task

S002

CAUTION

The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

S038

CAUTION

Eye protection should be worn for this procedure.

Attention

• Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

Firmware and driver download: You might need to update the firmware or driver after replacing a component.

• Go to Drivers and Software download website for ThinkSystem SD650-N V3 to see the latest firmware and driver updates for your server.

• Go to Update the firmware for more information on firmware updating tools.

Watch the procedure

• A video of this procedure is available at YouTube.

Procedure

1. Install the SMM2 module support bracket.
   1. Slide the support bracket into the enclosure.
   2. Align and insert the support bracket into the enclosure wall until it engages.
   Figure 1. Support bracket installation
   
   
2. Install the SMM2 module.
   1. Align and slide the SMM2module into the support bracket.
   2. Rotate the latch inwards to secure the SMM2module.
   Figure 2. SMM2 installation
   
   
3. If necessary, install the blank filler.
   1. Slide the blank filler into the enclosure.
   2. Align and insert the blank filler into the enclosure wall until it engages.
   Figure 3. Blank filler installation