Completing the FPolicy external engine configuration worksheet
You can use this worksheet to record the values that you need during the FPolicy external engine configuration process. If a parameter value is required, you need to determine what value to use for those parameters before you configure the external engine.
Information for a basic external engine configuration
You should record whether you want to include each parameter setting in the external engine configuration and then record the value for the parameters that you want to include.
| Type of information | Required | Include | Your values |
|---|---|---|---|
| storage virtual machine (SVM) name | Yes | Yes | |
| Engine name | Yes | Yes | |
| Primary FPolicy servers | Yes | Yes | |
| Port number | Yes | Yes | |
| Secondary FPolicy servers | No | ||
| External engine type | No | ||
| SSL option for communication with external FPolicy server | Yes | Yes | |
| Certificate FQDN or custom common name | No | ||
| Certificate serial number | No | ||
| Certificate authority | No |
Information for advanced external engine parameters
To configure an external engine with advanced parameters, you must enter the configuration command while in advanced privilege mode.
| Type of information | Required | Include | Your values |
|---|---|---|---|
| Timeout for canceling a request | No | ||
| Timeout for aborting a request | No | ||
| Interval for sending status requests | No | ||
| Maximum outstanding requests on the FPolicy server | No | ||
| Timeout for disconnecting a nonresponsive FPolicy server | No | ||
| Interval for sending keep-alive messages to the FPolicy server | No | ||
| Maximum reconnect attempts | No | ||
| Receive buffer size | No | ||
| Send buffer size | No | ||
| Timeout for purging a session ID during reconnection | No |
Give documentation feedback