Skip to main content

Install the front operator panel (2.5-inch drive model)

Use this information to install the front operator panel (2.5-inch drive model).

About this task

Attention
Read the following section(s) to ensure that you work safely.

Procedure

  1. Slide the front operator panel into the assembly bay.
    Figure 1. Front operator panel (2.5-inch drive model) installation
    Front operator panel (2.5-inch drive model) installation
  2. Install the two screws to secure the front operator panel.
    Figure 2. Screws installation
    Screws installation

After you finish

  1. Connect the front operator panel cables to the system board. See Front panel cable routing.

  2. Install the top cover. See Install the top cover.

  3. Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube