M.2 boot adapter cable routing
Use the section to understand the internal routing and connectors for the M.2 boot adapter.
Note
Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
When routing the cables, ensure that all cables are routed appropriately through the cable guides and cable clips.
When an M.2 adapter is installed, eight SATA/SAS drives configured with software RAID is not supported.
Figure 1. M.2 boot adapter cable routing
| From | To |
|---|---|
| 1 M.2 signal connector on the M.2 boot adapter | System board: M.2 signal connector |
| 2 M.2 power connector on the M.2 boot adapter | System board: M.2 power connector |
| 3 M.2 signal connector on the M.2 boot adapter | System board: SATA connector 6 |
| 4 M.2 signal connector on the M.2 boot adapter | System board: SATA connector 7 |
Give feedback