SNMP window
The SNMP window enables you to view the current SNMP settings for your system. You can also change your system's SNMP settings, enable SNMP protocols, and add trap hosts.
Command buttons
- Enable/Disable
- Enables or disables SNMP.
- Edit
- Opens the Edit SNMP Settings dialog box , which enables you to specify the SNMP communities for your storage system and enable or disable traps.
- Test Trap Host
- Sends a test trap to all the configured hosts to check whether the test trap reaches all the hosts and whether the configurations for SNMP are set correctly.
- Refresh
- Updates the information in the window.
Details
The details area displays the following information about the SNMP server and host traps for your storage system:
- SNMP
- Displays whether SNMP is enabled or not.
- Traps
- Displays if SNMP traps are enabled or not.
- Location
- Displays the address of the SNMP server.
- Contact
- Displays the contact details for the SNMP server.
- Trap host IP Address
- Displays the IP addresses of the trap host.
- Community Names
- Displays the community name of the SNMP server.
- Security Names
- Displays the security style for the SNMP server.
Give documentation feedback