Skip to main content

Editing QoS policy groups

You can use the Edit Policy Group dialog box in Storage Manager to modify the name and maximum throughput of an existing storage Quality of Service (QoS) policy group.

About this task

  • You can set the minimum throughput limit only on a performance based All Flash Optimized personality.

  • You cannot set the minimum throughput limit for volumes on a FabricPool-enabled aggregate.

  1. Click Storage > SVMs.
  2. Select the SVM, and then click SVM Settings.
  3. In the Policies pane, click QoS Policy Groups.
  4. Select the QoS policy group that you want to edit, and then click Edit.

    • The minimum throughput limit and the maximum throughput limit must be of the same unit type.

    • If you do not specify the minimum throughput limit, you can set the maximum throughput limit in IOPS and B/s, KB/s, MB/s, and so on.

    • If you do not specify the maximum throughput limit, the value is set to unlimited, and the unit that you specify does not affect the maximum throughput.

  5. In the Edit Policy Group dialog box, edit the QoS policy group details, and then click Save.