BMC CLI commands
You can log into the BMC using SSH. The following commands are supported from the BMC command line.
| Command | Function |
|---|---|
| system | Display a list of all commands. |
| system console | Connect to the system's console. Use ESC + t to exit the session. |
| system core | Dump the system core and reset. |
| system power cycle | Power the system off, then on. |
| system power off | Power the system off. |
| system power on | Power the system on. |
| system power status | Print system power status. |
| system reset | Reset the system. |
| system fw ver | View all firmware versions that the BMC can read. |
| system fw upgrade | Update the BMC firmware. |
| system log console | Dump host console logs. |
| system log sel | Dump system event (SEL) logs. |
| system fru show [id] | Dump all/selected field replaceable unit (FRU) info. |
Give documentation feedback