Skip to main content

Set storage array iSNS server refresh

The set storageArray isnsServerRefresh command refreshes the network address information for the iSNS server.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Storage Admin role.

Context​

This command is valid for only IPv4.

Syntax​

set storageArray isnsServerRefresh

Parameters​

None.

Notes​

If the DHCP server is not operating at full capability, or if the DHCP server is unresponsive, the refresh operation can take between two and three minutes to complete.

The set storageArray isnsServerRefresh command returns an error if you did not set the configuration method to DHCP. To set the configuration method to DHCP, use the set storageArray isnsIPV4ConfigurationMethod command.